Tribute DX 4WD V6-3.0L DOHC (2002)
4. Install the seat backrest trim cover.
1. Position and roll the seat backrest trim cover down over the seat backrest frame and pad.
2. Attach the hook and loop strips.
5. Attach the seat back trim cover J-retainers.
6. Install the manual lumbar control knob.
CAUTION: When positioning the seat or installing the seat bottom to the seat back, be careful not to damage the seat back pivot or the recliner
mechanism. This can cause damage to the seat components.
7. Install the seat backrest bolts.
1. Align the seat backrest to the seat bottom.
2. Install the seat backrest bolts.