Tribute DX 4WD V6-3.0L DOHC (2002)
Suspension Strut / Shock Absorber: Overhaul
Disassembly and Assembly
1. Remove the strut and spring assembly.
Warning:
^
Always wear safety goggles when using a spring compressor. Failure to follow these instructions may result in personal injury.
2. Mount the assembly in a suitable holding fixture and use a suitable spring compressor to compress the front coil spring.
3. Remove the strut piston rod nut.
4. Disassemble the strut and spring assembly.
1
Remove the metal sheet plate.
2
Remove the upper strut mount.
