Tribute DX 4WD V6-3.0L DOHC (2002)
3
Remove the thrust bearing plate.
4
Remove the thrust bearing
5
Remove the upper spring seat.
6
Remove the upper spring seat isolator.
7
Remove the spring.
8
Remove the dust boot.
9
Remove the rubber bump stopper
10
Remove the lowed spring seat.
Note:
^
New fasteners must be used when old fasteners are loosened and/or remover
Note:
^
Make sure that an alignment procedure is carried out any time the strut and spring assembly or the front shock absorber mounting bracket bolts
are loosened.
Note:
^
Be sure the spring is correctly seated in the insulator
5. To assemble, reverse the disassembly procedure.