380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-386004.png)
NOTE: Bolts of quality 10.9 should be used for the side bearing cap bolts. From November until December 1984, crankcases without side bolts
for the crank shaft bearing caps 2.3 and 4 and without side holes for these bolts were installed.
11
Measure axial crankshaft bearing play.
12
Turn crankshaft by hand and check whether it runs freely.
Associating Connecting Rod Bearings and Installing Connecting Rods:
