380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-386005.png)
13
Check connecting rod (conrod) bolts.
14
Recondition and square connecting rods. See: Connecting Rod/Service and Repair
15
Matching the stamped numbers, mount connecting rod bearing caps. Tighten connecting rod nuts with 40 - 50 Nm.
16
Measure basic bore in two directions. If the basic bore exceeds the specified value or is conical, touch up bearing cap contact surface on a surface
