380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-503005.png)
Figure 8 - Timing Chain Cover
30.
Replace O-rings (1 and 2) in timing chain cover (Figure 8).
Figure 9 - Alignment on Crankcase
31.
Install new intermediate, distributor drive, and crankshaft sprockets.
32.
With piston number one still positioned at ignition TDC, install the new timing chain together with the camshaft sprockets while matching up all
paint dots on chain and sprockets. The mark (2) on the distributor drive sprocket and the lug
(3)
on the crankcase must also be aligned for proper ignition timing (Figure 9).
33.
Tighten the left slide rail.
34.
Install slide rails in cylinder heads.
1 Drive key
2 Timing mark on sprocket 3 Lug on crankcase 4 Reference point to crankcase (to form common center line)
35.
Coat sealing surface of timing chain cover with sealing compound and install, and at the same time place the oil pump chain (using the curved
sheet metal strip) on the crankshaft sprocket.
Install the new radial seal with installation tool.
