380SL (107.045) V8-3.8L (116.960) (1982)
Lock And Cap
d. Remove lock cylinder (with cap attached) from steering lock assembly. Remove release wire, turn key to position "0", and remove starter key.
e. Remove lock cylinder from cap.
f.
Re-install lock cylinder in steering column lock without cap.
10.
ALL VERSIONS Disconnect contact switch connector.
Steering Column Clamp Bolts
11.
Loosen lock tube fastening clamp.
12.
With starter switch in position "1", depress lock pin with a 3 mm punch.
13.
Turn starter switch to position "0" and pull out lock assembly.
14.
Remove steering lock from lock tube and instrument panel.
Lock Cylinder Cap
15.
Turn lock cylinder to position "1" and remove contact switch.
INSTALLATION
1.
Turn lock cylinder to position "1" and install in steering lock.