380SL (107.045) V8-3.8L (116.960) (1982)
/v8-3.8l_(116.960)/Page-1134004.png)
Lock Pin Location (All Versions)
2.
Turn steering lock cylinder to position "0" while holding lock pin (10) and steering lock striker in.
3.
Insert steering lock assembly into lock tube.
4.
Twist lock assembly in tube until lock pin engages tube.
5.
Turn starter to position "1" and install starter switch connector.
6.
VERSIONS 1 and 2 (Plug-on cap) Install cylinder lock cap.
7.
VERSION 3 (Screw-on cap)
a. Turn starter switch to position "1".
b. Remove switch from steering lock.
c. Lightly coat cylinder cap threads with bearing grease.
