mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Right Side|Page 1881 > < Right Side|Page 1879
Page 4
background image

Install the ignition coil.
1

Install the ignition coil.

2

Install the bolts.

3

Connect the electrical connectors.

7. Install the fuel charging wiring to the fuel injectors.

-

Begin at the front of the engine and work towards the rear of the engine.

8. Connect the spark plug wires and install the bracket.
9. Install the upper intake manifold. 

NOTE:  When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its
adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

10. Connect the battery ground cable.

Right Side|Page 1881 > < Right Side|Page 1879