Sable V6-183 3.0L DOHC VIN S MFI (1997)
(base circle).
11. Verify the alignment flags (marked RFF) on the camshafts are aligned.
12. Remove cylinder head camshaft journal thrust cap retaining bolts and thrust caps from LH cylinder head.
13. Loosen remaining LH cylinder head camshaft journal cap bolts 7-8 turns in sequence shown in several passes (approximately 1-2 turns each pass)
to allow camshafts to be raised from LH cylinder head. Do not remove retaining bolts completely.
14. With LH cylinder head camshaft journal caps and camshafts loose on LH cylinder head, remove rocker arms.
Camshafts, Rocker Arms And Valve Tappets - LH Cylinder Head Shown, RH Similar (1 Of 2)
