Sable V6-183 3.0L DOHC VIN S MFI (1997)
3. Apply 8 mm (0.31 inch) diameter bead of Black Silicone Rubber F4AZ-19562-B or equivalent sealant meeting Ford specification
WSF-M4G323-A1 at two places on the valve cover sealing surfaces where the engine front cover and cylinder head contact.
3. Tighten valve cover bolts and stud bolts in sequence shown to 8-12 Nm (71-106 inch lbs.) within six minutes of applying sealer.
4. Follow removal procedure in reverse order to complete assembly.
