Sable V6-183 3.0L DOHC VIN S MFI (1997)
8. Disconnect the ignition wires from the LH cylinder head (cylinder numbers 4, 5 and 6). Position ignition wires out of the way.
9. If required, remove fuel injection supply manifold and fuel injectors from lower intake manifold (IMRC).
10. Remove lower intake manifold to cylinder head retaining bolts in sequence shown.
CAUTION: Do not loosen or damage intake manifold runner control actuator cable retainer bracket.
11. Remove lower intake manifold (IMRC) from cylinder heads.
12. Remove intake manifold gaskets from cylinder heads and discard intake manifold gaskets.
Installation