Sable V6-183 3.0L DOHC VIN S MFI (1997)
3. Remove two screws retaining air bag diagnostic monitor to the air bag monitor bracket.
4. NOTE: Screw is part of the air bag diagnostic monitor and cannot be removed.
Loosen screw until disengaged from air bag monitor bracket and remove air bag diagnostic monitor from vehicle.
5. Remove two retaining screws and metal cover from A/C evaporator housing.
6. NOTE: Do not attempt to bend any part of the pivot shaft; it is brittle and will break.
Gently depress locking ramp on pivot shaft and remove pivot shaft from heater air damper door.
7. Rotate pivot shaft and remove from arm on vacuum control motor.
8. Remove screws retaining heater damper door vacuum control motor to A/C evaporator housing.
