Sable V6-183 3.0L DOHC VIN S MFI (1997)
2. Disassemble, clean and inspect direct one-way clutch and inner and outer races. Service as required.
3. Assemble one-way clutch. Use petroleum jelly to hold parts together.
CAUTION: Circular depressions on top of nylon cage must be visible when installed on inner race or transaxle may be improperly assembled.
NOTE: Outer race must rotate clockwise.
4. Remove two intermediate and direct clutch hub seals using O-Ring Tool T71P-19703-C. Discard O-ring seals.