Sable V6-183 3.0L DOHC VIN S MFI (1997)
5. Remove clutch pressure plate retaining ring, clutch pressure plate and clutch pack assembly.
CAUTION: Check for wear on intersplines of friction plates. If found worn, they must be replaced.
NOTE: Number of plates in clutch pack may vary with application.
6. Compress direct clutch return spring assembly using Clutch Spring Compressor T65L-77515-A. Remove retaining ring with snap ring pliers.
CAUTION: Do not allow clutch spring compressor to bottom out on piston.
7. Remove tool. Remove direct clutch return spring.
