Sable V6-183 3.0L DOHC VIN S MFI (1997)
4. Compress low-intermediate clutch support and spring assembly using Clutch Spring Compressor T65L-77515-A. Install retaining ring.
CAUTION: Do not fully compress spring retainer.
5. Install No. 15 plastic spring retainer washer to low/intermediate clutch support and spring.
CAUTION: Make sure locking tabs are snapped over retainer.
6. Install No. 15 sun gear thrust bearing to rear planetary support assembly using petroleum to hold in place.
NOTE: Lip on bearing goes over hub.
