Sable V6-183 3.0L DOHC VIN S MFI (1997)
7. Turn rear planetary support assembly over. Install select fit No. 16 final drive gear thrust race to rear planetary support assembly using petroleum
jelly to hold in place.
One-Way Clutch, A/T
DISASSEMBLY
1. Rotate low-intermediate one-way clutch outer race counterclockwise to remove from rear sun gear assembly.
2. Rotate roller and cage assembly clockwise to unlock tabs.
3. Remove low-intermediate one-way clutch roller and cage assembly from low-intermediate one-way clutch race (outer).
4. Clean and inspect rollers and cage for cracks, brinelling or scoring. Service as required.
ASSEMBLY
