Sable V6-183 3.0L DOHC VIN S MFI (1997)
7. Remove and discard lower ball joint nut. Using Ball Joint Remover T96P-3010-A, Tie Rod End Remover Adapter T81P-3504-W and Pitman Arm
Puller T64P-3590-F, separate lower ball joint from front suspension lower arm.
8. Using Rotunda Spring Compressor 164-R3571 or equivalent, compress front coil spring until ball joint stud is free from front suspension lower
arm. Pull hub and strut assembly outward remove CV joint stub shaft from hub, rest halfshaft on frame rail.
9. Assemble CV Joint Puller T86P-3515-A1, CV Joint Puller Extension T86P-3514-A2 and Impact Slide Hammer D79P-100-A or equivalent. Insert
CV joint puller adapter behind inboard CV joint housing.
10. Use impact slide hammer to release circlip.