Sable V6-183 3.0L DOHC VIN S MFI (1997)
7. Clamp front wheel driveshaft joint in a vise. Care should be taken not to damage front wheel dust shield.
NOTE: The vise must be equipped with jaw caps to prevent damage to the shaft splines. Vise jaw caps are made of copper, brass, wood or other
soft material. They are slipped over the steel jaws of the vise so as not to scratch or nick finished surfaces.
Fig. 5 CV joint ball removal
8. Press down on inner race until it tilts enough to allow removal of the ball. A tight assembly can be tilted by tapping the inner race with wooden
dowel and hammer. Do not hit the cage.
