Sable V6-183 3.0L DOHC VIN S MFI (1997)
9. With the cage sufficiently tilted, remove ball from cage. Repeat this step until all six balls are removed. If balls are tight in the cage, use a
screwdriver to pry the balls from cage. If a screwdriver is necessary, use an old screwdriver and blunt any sharp edges on the blade with a grinder
or file.
CAUTION: Exercise care to prevent scratching or other damage to the inner race or cage spheres.
10. Pivot cage and inner race assembly until it is straight up and down in the outer race. Align cage windows with outer race lands while pivoting the
bearing cage. With the cage pivoted and aligned, lift assembly from the outer race.
