Sable V6-183 3.0L DOHC VIN S MFI (1997)
Fig. 12 Bearing Cage/Inner Race Assembly Removal From Outer Constant Velocity Joint
11. Rotate inner race up and out of the cage.
ASSEMBLY
1. Apply a light coating of grease on inner and outer ball races. Install the inner race in the bearing cage.
CAUTION: Use only Constant Velocity Joint Grease (High Temp) E43Z-19590-A or equivalent meeting Ford specification ESP-M1C207-A.
Fig. 15 Counterbore Positioning: Ball Groove & Window Alignment
2. Install inner race and cage assembly in the outer race.
3. Install the assembly vertically and pivot 90° into position.