Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
DISASSEMBLY
1. Remove the oil distributor sleeve seals from the 3-4 clutch drum and input shaft. Discard the oil distributor sleeve seals.
2. Use a screwdriver to remove the 3-4 clutch pressure plate retainer snap ring.
3. Remove the 3-4 clutch pressure plate, 3-4 clutch internal splice clutch plates and 3-4 clutch external spline clutch plates.
NOTE: Identify the clutch plates, their order, and their direction when removing them to aid in installation.