Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
4. Use a hydraulic press and Bridge (part of T78P-3504-B) to compress the 3-4 clutch piston return springs and install the 3-4 clutch snap ring.
NOTE: Do not align the 3-4 clutch pressure plate retainer snap ring with the clutch piston spring retainer stopper.
5. Install the 3-4 clutch internal spline clutch plates, 3-4 clutch external spline clutch plates, and the 3-4 clutch pressure plate in the reverse order of
removal.
6. Install the 3-4 clutch pressure plate retainer snap ring.
7. Use a feeler gauge to measure the clearance between the 3-4 clutch pressure plate and the 3-4 clutch pressure plate retainer snap ring.
8. The standard clearance is 1.8-2.2 mm (0.071-0.087 inch) with a maximum of 3.0 mm (O.118 inch). If the clearance is not within the maximum
specification select and insert the proper 3-4 clutch pressure plate from the 3-4 Clutch Pressure Plate Specifications chart to obtain the standard
clearance.
3-4 Clutch Pressure Plate Specifications
Part Number and Thickness:
F3XY-7B006-N: 3.0 mm (0.118 inch)
F3XY 7B006-AAA: 3.2 mm (0.126 inch)
F3XY-7B006-P: 3.4 (0.134 inch)