Villager V6-181 3.0L SOHC VIN 1 EFI (1997)
F3XY-7B006-Q: 3.6 (0.142 inch)
F3XY-7B006-R: 3.8 (0.150 inch)
9. Check 3-4 clutch operation by covering one side of the 3-4 clutch cylinder and shaft oil hole with a nylon cloth and apply compressed air to the
other side of the 3-4 clutch drum and input shaft oil hole. The 3-4 clutch should apply fully.
10. Install the new oil distributor sleeve seals to the 3-4 clutch drum and input shaft.
NOTE: Apply petroleum jelly to the new oil distributor sleeve seals prior to installation.
11. Wrap the oil distributor sleeve seals with thick paper and tape to prevent the oil distributor sleeve seals from spreading.