Door mirrors (page 2 of 2)

When the mirror switch is turned to the right, the ganged LH/RH contacts in the mirror switch (C0066) connect to BP and BN wires from the adjustment motors in the RH door mirror (C0353 on LHD; C0352 on RHD). When the mirror switch is subsequently tilted to the left, the ganged left/ right contacts in the mirror switch connect the feed from fuse 18 to the BP wire and connect the SW wire, from the horizontal adjustment motor (C0353 on LHD; C0352 on RHD), to the B wire between the mirror switch (C0066) and the earth point (C0564). The horizontal adjustment motor then runs to turn the mirror glass to the left. When the mirror switch is tilted to the right, the left/ right ganged contacts reverse the polarity of the horizontal adjustment motor connections, and the mirror glass turns to the right. RH door mirror vertical adjustment operates the same way as horizontal adjustment, using the ganged up/ down contacts in the mirror switch and the BN and SW wires between the mirror switch (C0066) and the vertical adjustment motor in the RH door mirror (C0353 on LHD; C0352 on RHD).