General data, torque settings and capacitiesHood
Hood
Soft Top
| Hood frame hinge to body | 45 Nm |
| Hood catch to header rail | 20 Nm |
| Hood header strikers | 6 Nm |
| Hard Top |
| Front top catch to hard top | 10 Nm |
Seats
| Seat runners | 45 Nm |
| Squab frame to cushion frame | 45 Nm |
HEATING AND VENTILATION
| Fascia rail support bracket | 10 Nm |
| Heater mountings | 10 Nm |
| Intake duct to body | 10 Nm |
AIR CONDITIONING
Compressor
| Compressor to mounting bracket | 45 Nm |
| Compressor to pipe union | 25 Nm |
Condenser
| Mounting bracket to striker plate panel | 17 Nm |
| Air conditioning pipe to condenser | 5 Nm |
Evaporator
| Evaporator to heater - clamp | 3 Nm |
| Evaporator to lower dash panel | 9 Nm |
Receiver Drier
| Air conditioning pipe to receiver drier | 5 Nm |
Thermostatic Expansion Valve
| Evaporator pipe clamp to expansion valve | 5 Nm |
| Evaporator pipe, bracket | 7 Nm |
| Trinary switch | 10 Nm |
WIPERS AND WASHERS
| Wiper arm to spindle | 20 Nm |
| Motor and linkage assembly to scuttle | 10 Nm |
| Motor to linkage bracket | 12 Nm |
| Crank to motor spindle | 18 Nm |
03 General
