Example – 12 pin Connector

1. Cav: The connector pin (cavity) number. 2. Col: The colour of wire populating the connector pin. 3. Cct: Identifies the model or feature which uses the wire.

'ALL' means applicable to all models in the range fitted with the feature or system in question. In instances where different models, features or systems require different colour wires to be fitted in a cavity, each instance of the cavity is included in the Pinout table.

Note: Wires may not be fitted to all cavities

Example – 12 pin Connector

Where necessary a table listing the circuit reference numbers against a description of the model or features which may or may not be fitted, can be found at the beginning of the Connector section. A sample of a typical table is shown below: