Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1768001.png)
Power Steering Line/Hose: Service and Repair
Replacing Power Steering Intake Pipe
Manual Transmission
Recycling:
Observe country-specific waste disposal regulations.
Draw hydraulic fluid out of tank (do not reuse).
Remove and install ear clip.
Release clip from intake pipe (1) on supply tank and remove pipe.
Release clip holding pipe to steering pump and remove pipe. Catch any oil in suitable container.
Remove low pressure banjo bolt (1) to gain access to high pressure banjo bolt (2).
Remove pipe from vehicle.
Low pressure pipe to steering gear
M16 Banjo Bolt ................................................................................................................................................................................................. 40 Nm
High pressure pipe to steering gear
M14 Banjo Bolt ................................................................................................................................................................................................. 34 Nm
