Cooper (R50) L4-1.6L (W10) (2002)
/l4-1.6l_(w10)/Page-1837003.png)
Remove engine lower stabilizer (2) retaining bolts (1) from engine and subframe.
Seal plug, chain tensioner ............................................................................................................................................................................................ 63 Nm
Seal plug to cylinder head ........................................................................................................................................................................................... 18 Nm
Locate gearbox hydraulic jack (1) to subframe jacking point (2)
Remove left and right front subframe center bolts (1) to body.
Front subframe centre to body
M12 x 1,75 x 18 .............................................................................................................................................................................................. 100 Nm
Note: Self forming.
Remove bolts (1) retaining left and right compliance bush housing (2) to body.
Compliance bush housing to body
M10 Screw ..................................................................................................................................................................................... 59 Nm + 90° ± 15°
