Cooper Convertible (R57) L4-1.6L (N12) (2009)
Release screw (2).
Installation:
Refit eccentric adjustment washer.
Tightening torque 33 32 2AZ See: Control Arm/Specifications/Control Arms and Struts (Rear).
Release screw (1).
Installation:
Tightening torque 33 52 1AZ See: Suspension Strut / Shock Absorber/Specifications/Shock Absorbers (Rear).
Mark position of trailing arm bracket to body to simplify subsequent adjustment of rear axle.
Release screws (1) and remove trailing arm with bracket.
Installation:
Tightening torque 33 32 5AZ See: Control Arm/Specifications/Control Arms and Struts (Rear).
After installation: