Cooper S (R56) L4-1.6L Turbo (N14) (2009)
Version 2:
Replace damaged bump stops (refer to EPC):
-
(1) Bump stop with ejector
Press ejector (1) into bump stop and, in this position, twist approx. 90° counterclockwise with a Phillips screwdriver.
This locks the ejectors (1) in the bump stops.
Adjust bump stop (2) to correct height by turning left or right.
Unlock the ejector (1) again after completing adjustment.
Version 3:
Replace damaged bump stops (refer to EPC):
-
(1) Bump stop