3000GT V6-3.0L SOHC (1998)
To disconnect clutch hose from the clutch tube, proceed as follows:
1. Secure the nut on the clutch hose and loosen the flare nut on the clutch tube.
2. Remove the clip from the clutch hose to remove clutch hose from bracket.
<D> Clutch Tube A <FWD> (Clutch Hose Side) / Clutch Tube B <AWD> (Clutch Hose Side) Removal
While holding the clutch hose side nut, loosen the clutch tube flare nut.
Installation Service Points
>A< Clutch Tube B <AWD> / Clutch Tube A <FWD> / Clutch Hose / Clutch Tube Installation
Be careful that the clutch hose does not become twisted.
>B< Clutch Release Cylinder Installation
On AWD-vehicles, use a flat type short box wrench to tighten the clutch release cylinder mounting bolts.
>C< Vacuum Pipe <AWD> Installation
If the vacuum pipe has a stepped part, connect the vacuum hose to the pipe securely, up to the stepped part, as shown in the illustration.
>D< Air Cleaner Cover, Air Intake Hose A <AWD> Installation
Align slots indicated by arrows in air intake hose A with markings on air intake hoses B and C; then, insert hoses B and C all the way into air
intake hose A.
Insert air intake hoses B and C all the way up to the roots on the turbo charger end.
>E< Air Hose A <AWD> Installation