3000GT V6-3.0L SOHC (1998)
Connect the air hoses ensuring that alignment marks are aligned with projections. Insert air hoses B and C into pipe all the way to its step.
CAUTION: Be careful not to allow any foreign matter to get into the hoses, pipes, or the intercooler itself.
>F< Clearance Between Clutch Booster Push Rod And Piston Adjustment <AWD>
1. Set up the special tool on the master cylinder.
2. Bring the shaft of the special tool to a position where it lightly contacts the piston of the master cylinder.
3. Turn the wing nut to lock the shaft.
4. Apply a negative pressure of -66.7 kPa (19.6 inch Hg.) to the clutch booster using a hand vacuum pump.
5. Turn the special tool upside down and place it off-center on the clutch booster.
