3000GT VR-4 AWD V6-2972cc 3.0L DOHC MFI Twin Turbo (1998)
1. Set the special tool to the front hub unit bearing.
2. Holding the special tool (bolt), tighten its nut to 200-260 Nm (145-188 ft. lbs.).
3. Turn the hub to cause grease to distribute evenly over the bearing.
4. Measure the rotation starting torque of the hub.
Limit: 1.8 Nm (16 inch lbs.) or less
5. The starting torque must be within the limit and, in addition, the bearing must not feel rough when rotated.
DISASSEMBLY AND REASSEMBLY
Disassembly Service Points
<A> Hub And Rotor Removal
