mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

All Technical Service Bulletins for Trunk / Liftgate: > < Tailgate - Rattles
Page 2
background image

2.

With tailgate fully closed, the dampers should be depressed between 2 mm to 8 mm. If less than 2 mm, add shim(s), If more than  8 mm,
remove shim(s).

NOTE:
A visual inspection of the damper's travel is possible by viewing the damper from behind with the tailgate closed.

Warranty Considerations

Normal Warranty Procedures Apply:

Labor Operation Code:

23854291 (installation and adjustment of new dampers).

Time Allowance:

0.3 hours per vehicle

Failure Code:

51

All Technical Service Bulletins for Trunk / Liftgate: > < Tailgate - Rattles