Diamante V6-2972cc 3.0L SOHC (1992)
2.
Remove the driver's seat and the upper and lower sections of the rear seat. For removal and installation instructions, refer to the 1992 Diamante
Service Manual, Volume 1, Section 52A Interior.
3.
Remove the kick panel trim and foot rest from the driver's side of the vehicle.
4.
Remove the front and rear scuff plates from the driver's side of the vehicle.
5.
Remove the driver's side center pillar lower trim and rear wheelhouse trim.
6
Unbolt the trunk release handle from the floorboard.