Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Crankshaft Main Bearing Seal: Service and Repair
Front Seal
1. Disconnect battery ground cable.
2. Release fuel system pressure as outlined under Technician Safety Information.
3. Remove transaxle as outlined under Automatic Transmission/Transaxle.
4. Secure crankshaft using end yoke holder tool No. MD998754, or equivalent.
5. Remove adapter and driveplates.
Fig. 43 Oil Seal Removal
6. Cut out a portion in camshaft oil seal lip, Fig. 43.
7. Cover tip of a suitable screwdriver with a clean soft cloth and pry out seal at cut out portion of seal. Use care not to damage camshaft or
cylinder head.
8. Reverse procedure to install, using seal installer tool No. MD998718-01, or equivalent, to install rear main oil seal.