Diamante Sedan V6-2972cc 3.0L DOHC (1993)
Front Crankshaft Oil Seal: Service and Repair
1. Disconnect battery ground cable.
2. Release fuel system pressure as outlined under Technician Safety Information.
3. Remove timing belt as outlined under Timing Belt.
4. Remove crankshaft sprocket.
Fig. 43 Oil Seal Removal
5. Cut out a portion in camshaft oil seal lip, Fig. 43.
6. Cover tip of a suitable screwdriver with a clean soft cloth and pry out seal at cut out portion of seal. Use care not to damage camshaft or
cylinder head.
7. Reverse procedure to install, using seal installer tool No. MD998717, or equivalent, to install oil seal.