Diamante Sedan V6-3.5L SOHC (1999)
CAUTION: If the number of brake lever notches engaged is less than the standard value, the cable has been over adjusted. Be sure to adjust it
to within the standard value.
(9) After completing the adjustment, check that there is no play between the adjusting nut and the pin. Also check that the adjusting nut is securely
held by the nut holder.
(10) With the parking brake lever in the released position, turn the rear wheels to confirm that the rear brakes are not dragging.
(11) Remove the jack stands and lower the vehicle to the floor. Retorque the wheel nuts to the specified torque.