Diamante Sedan V6-3.5L SOHC (1999)
Clockspring Assembly / Spiral Cable: Service and Repair
CAUTION
1. Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
2. Do not drop the air bag module or clock spring or allow contact with water, grease or oil. Replace it if a dent, crack, deformation or rust are
detected.
3. The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of the air
bag modules.
4. Do not expose the air bag to temperatures over 93° C (200 ° F)
5. After deployment of an air bag, replace the air bag modules. Check the clock spring. If faulty, replace it with a new part.
6. Wear gloves and safety glasses when handling an air bag that has deployed.
7. An undeployed air bag module should only be disposed of in accordance with the procedures specified under "Undeployed Air Bag Module
Disposal".
Pre-removal Operation
After setting the steering wheel and the front wheels to the straight ahead position, remove the ignition key.
REMOVAL