Mitsubishi Workshop Service and Repair Manuals

Brake Rotor/Disc: Specifications

The content of this article reflects changes in TSB 10-35-001.

Brake Rotor/Disc 

Disc brake disc thickness

Front

Standard value .......................................................................................................................................................................  26.0 mm (1.02 inch)
Limit ......................................................................................................................................................................  Minimum 24.4 mm (0.96 inch)

Rear

Standard value .......................................................................................................................................................................  20.0 mm (0.79 inch)
Limit ......................................................................................................................................................................  Minimum 18.4 mm (0.72 inch)

Disc brake disc run-out

Front ..........................................................................................................................................................................................  0.1 mm (0.0039 inch)
Rear .........................................................................................................................................................................................  0.04 mm (0.0016 inch)

Disc effective dia x thickness

Front  .............................................................................................................................................................................  241 x 26 mm (9.5 x 1.0 inch)
Rear brakes ..................................................................................................................................................................  237 x 20 mm (9.3 x 0.79 inch)