Eclipse GT V6-3.0L SOHC (2000)
Connectors
CIRCUIT OPERATION
The multi-center display is energized by the battery through the ignition switch (ACC) and (IG1).
TECHNICAL DESCRIPTION (COMMENT)
The ground circuit, the battery circuit, the ignition switch (ACC) circuit or the ignition switch (IG1) circuit is suspected to be open or defective.
TROUBLESHOOTING HINTS
-
Malfunction of the multi-center display
-
Damaged harness wires and connectors
DIAGNOSIS
Required Special Tool:
MB991223: Harness Set
STEP 1. Check the multi-center display ground circuit at the multi-center display connector C-09.
1. Disconnect the multi-center display connector C-09 and measure at the harness side.
2. Resistance between terminal 6 and ground.
-
Should be less than 2 Ohms.
If open circuit, go to Step 2.
If less than 2 Ohms, go to Step 4.
