Eclipse GT V6-3.0L SOHC (2000)
STEP 12. Check the harness wires between C-09 and ignition switch (IG1).
NOTE: After checking joint connector C-78 and junction block connector C-101 and C- 104, check the wires. If joint connector C-78 and junction
block connector C-101 and C-104 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between C-09 and ignition switch (IG1) are damaged, repair them.
The multi-center display should work normally.