Eclipse GT V6-3.0L SOHC (2000)
STEP 3. Check the harness wires between ETACS-ECU connector C-114 and fusible link (2).
NOTE: After checking junction block connector C-110 and intermediate connector C-89, check the wires. If junction block connector C-110 and
intermediate connector C-89 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between ETACS-ECU connector C-114 and fusible link (2) are damaged, repair them.
The central door locking system should work normally.
STEP 4. Check the junction block connector C-114 for damage.
If the junction block connector C-114 is damaged, repair or replace it. Refer to Harness Connector Inspection.
The central door locking system should work normally. If the connector is in good condition, go to Step 5.