Eclipse Spyder GT V6-3.0L SOHC (2002)
2. Check continuity when the switch on the power window main switch is operated to "UP" or "DOWN" position.
Q: Is the power window main switch normal?
YES: Go to Step 2.
NO: Replace the power window main switch. When the power window sub-switch is operated, the power window (RH) should open or close
normally.
STEP 2. Check the power window lock switch.
Q: Is the power window lock switch at the "UNLOCK" position?
YES: Go to Step 3.
NO: Operate the power window lock switch to the "UNLOCK" position? When the power window sub-switch is operated, the power window (RH)
should open or close normally.
STEP 3. Check the continuity of the power window sub-switch.
1. Remove the power window sub-switch. Refer to Door - Door Trim and Waterproof Film.
2. Check continuity when the power window sub-switch is operated to "UP" or "DOWN" position.