mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2118 > < Initial Inspection and Diagnostic Overview|Page 2116
Page 86
background image

STEP 6. Check power window relay connector C-116 and front power window sub-switch connector E-05 for damage.

Q: Are power window relay connector C-116 and power window sub-switch connector E-05 in good condition? 

YES: Go to Step 7.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. When the power window sub-switch is operated, the power window
(RH) should open or close normally.

Initial Inspection and Diagnostic Overview|Page 2118 > < Initial Inspection and Diagnostic Overview|Page 2116