mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2166 > < Initial Inspection and Diagnostic Overview|Page 2164
Page 134
background image

STEP 7. Check the wiring harness between windshield washer motor connector A-33 and ground.

Q: Is the wiring harness between windshield washer motor connector A-33 and ground in good condition?

YES: No action to be taken.

NO: Repair the wiring harness. Check that the windshield washer works normally.

STEP 8. Check windshield washer motor connector A-33 and front-ECU connector A-11X for damage.

Q: Are windshield washer motor connector A-33 and front-ECU connector A-11X in good condition?

YES: Go to Step 9.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the windshield washer works normally. 

Initial Inspection and Diagnostic Overview|Page 2166 > < Initial Inspection and Diagnostic Overview|Page 2164