Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 9. Check the wiring harness between windshield washer motor connector A-33 and front-ECU connector A-11X.
NOTE: Also check intermediate connector C-06. If intermediate connectors C-06 is damaged, repair or replace the connector as described in Harness
Connector Inspection.
Q: Is the wiring harness between windshield washer motor connector A-33 and front-ECU connector A-11X in good condition?
YES: No action to be taken.
NO: Repair the wiring harness. Check that the windshield washer works normally.
Inspection Procedure H-1
Rear Wiper and Washer: Rear Wiper does no not Work at All.
NOTE: This troubleshooting requires use of scan tool MB991502 and SWS monitor kit MB991862. For details of how to use the SWS monitor, refer
to "How to use SWS monitor."