Eclipse Spyder GT V6-3.0L SOHC (2002)
STEP 21. Check the wiring harness between position light (RH) connector A-32 and ground.
Q: Is position light (RH) connector A-32 in good condition?
YES: Go to Step 21.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the position light (RH) illuminates normally.
STEP 22. Check position light (RH) connector A-32 and front-ECU connector A-10X for damage.
Q: Are position light (RH) connector A-32 and front-ECU connector A-10X in good condition?
YES: Go to Step 23.
NO: Repair or replace the connector. Refer to Harness Connector Inspection. Check that the position light (LH) illuminates normally.
