mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2327 > < Initial Inspection and Diagnostic Overview|Page 2325
Page 295
background image

STEP 6. Check the wiring harness between theft-alarm horn relay connector A-06X and fusible link (4).

Q: Is the wiring harness between theft-alarm horn relay connector A-06X and fusible link 4. in good condition?

YES: Replace the ETACS-ECU. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

NO: Repair the wiring harness. All the vehicle horn (including the theft-alarm horn) should sound when the theft-alarm system is triggered.

STEP 7. Check theft-alarm horn relay connector A-06X and theft-alarm horn connector A-25 for damage.

Q: Are theft-alarm horn relay connector A-06X and theft- alarm horn connector A-25 in good condition?

YES: Go to Step 8.

NO: Repair or replace the connector. Refer to Harness Connector Inspection. All the vehicle horn (including the theft-alarm horn) should sound when
the theft-alarm system is triggered.

Initial Inspection and Diagnostic Overview|Page 2327 > < Initial Inspection and Diagnostic Overview|Page 2325